| |
|
|
| |
Water Alarms
|
Source
Amazon |
Zircon 64003 Water Detector
with Leak Alert |
|
|
Description
The battery-operated unit has an automatic sensor that emits a
loud, piercing alarm—similar to a smoke detector’s—when it comes in
contact with water. Simply place the alarm near a washing machine,
inside of a sump pump pit, on floor of a basement or crawlspace, or
wherever you suspect water entry. This compact, set-it-and-forget-it
alarm is only slightly larger than a deck of cards, and it’s powered by
a 9-volt battery (not included). -- Joseph Truini |
|
|
Click Picture for
Details or to Purchase these Items |
|
| |
|
Source
Amazon |
Reliance Controls
Automatic Phone Out Alarm with 3 Functions #THP201 |
|
|
Description
Automatic Phone-Out Home Monitoring System (Power Outage,
Freezing Temperatures and Flooding). Keypad base unit plugs into phone
line and electrical outlet. Internal temperature and power outage
sensors and external water sensor continually monitor home for three
alarm conditions: 1) temperatures below 45 degrees F, 2) power outages
lasting more than either 5 or 30 minutes (users' choice), and 3)
flooding. Base unit calls up to three telephone numbers anywhere in
North America when problem occurs. Identifies specific problem with
voice message followed by user instructions for remote deactivation.
Battery included. |
|
|
Click Picture for
Details or to Purchase these Items |
|
| |
Water Shut Off
|
Source
Amazon |
Washing Machine Shut-Off Valve |
|
|
Description
Controls both hot and cold water simultaneously protecting
machine parts and hoses from damaging effects of water pressure. 1
fingertip lever ends inconvenience of turning 2 hand type valves.
Furnished with 1 2" copper (5 8" O.D.) |
|
|
Click Picture for
Details or to Purchase these Items |
|
| |
|
Source
Amazon |
ELK Water Shutoff
Valve 12V |
|
|
Description
Don't let your home fall victim to a burst pipe. By connecting
this Elk Water Shutoff Valve to your home automation controller, your
water main can be shut off before significant damage is done. A water
sensor is placed where there is a potential source of a leak - under
your washing machine or water heater, on the bathroom floor - and when a
leak is detected, the water main can be shut off in less than 4 seconds.
Elk's Water Shutoff Valve is a full-port, 2-way ball valve with a 1-inch
bore, and it is made of 316 stainless steel and is safe for drinking
water. The motorized actuator has a permanently lubricated gear drive
with sufficient torque to open or close the valve under high pressure or
after long periods of inactivity. This valve is built with
commercial-grade seats and seals for a long service life. It is a
non-restricting valve, which meets the approvals of state and municipal
water authorities.
|
|
|
Click Picture for
Details or to Purchase these Items |
|
| |
|
Source
Amazon |
WaterCop 3/4 inch
with 3 Water Hounds |
|
|
Description
Automatic Water Shut Off Valve Reduce your insurance premiums and
protect your property from significant water damage with this automatic
water water shut off device that responds to moisture sensors.. If you
have 3/4 inch water pipes, choose this Water Cop 3/4 Inch Brass Ball
Valve Automatic Water Shut Off Valve Starter Kit with Security Alarm
Interface and 3 Moisture Sensors. A slow or fast water leak can mean
thousands of dollars worth of repairs plus inconvenience and increased
insurance premiums. Contents of this Kit: Water Cop Automatic Actuator
with 3/4 Inch Brass Ball Valve and Home Security Interface and three (3)
Single Probe Water Hound Moisture Sensors. Built-in I/O port with RJ45
connection. Water Cop Installation Locations: After existing main water
line shut off valve or inside building if shut-off is outside. Maximum
working water pressure is 125 PSIG. Installation Time: Professional
installation: one to two hours+. For new dwellings, install WaterCop
Ready Water Valves and add WaterCop later. WaterCop Power Requirements:
120VAC electrical outlet. outlet. Water Cop Security System Option: Low
voltage interface terminal direct wires to home security alarm system or
home automation control panel. For security systems with auxiliary
outputs, contact security system dealer/installer for interface
installation. WaterHounds: Local Water Alarm for Moisture Transmit
Signals for to Activate Your WaterCop. For Maximum Water Leak Detection,
Place Water Hound Water Alarm Near Every Water Using Appliance. Power
Source: 2 AA Batteries (Not Included) or AC Power Adapter (Not Included)
Operational Modes: WaterCop Activation Device Plus Independent Moisture
Sensing Water Alarm Alarm Intensity: Similar to Watch Alarm or Pager
Single Probe: One 9.75 Ft. Cord and One Transmitter/Alarm Twin Probe:
Two 9.75 Ft. Cords and One Transmitter/Alarm Operational Distance from
WaterCop: Up to 200 Feet. Frequency goes thru sheetrock and concrete. |
|
|
Click Picture for
Details or to Purchase these Items |
|
| |
|
Source
Amazon |
Watts IntelliFlow
Automatic Washing Machine Shut Off Valve #0004640 |
|
|
Description
The Watts IntelliFlow Automatic Machine Shutoff Valve is equipped
with a state-of-the-art electric current sensing device. When the
washing machine is turned on, the device senses current flow to the
washing machine. This causes it to actuate its solenoid water valves,
allowing water to flow to the washing machine. When the washing machine
shuts off upon completion of the full wash cycle, the device senses the
lack of current and closes the water valves. The IntelliFlow remains
closed until the next time you turn the washer on. The leak sensor
provides additional protection from water damage while the washing
machine is in operation. Water detected at the sensor results in
immediate shut off of water flow to the washing machine hose. By
installing an IntelliFlow, you are protecting your home from potential
major water damage from a burst or leaking washing machine inlet hose. |
|
|
Click Picture for
Details or to Purchase these Items |
|
| |
Carbon Monoxide Alarms
|
Source
Amazon |
Kidde Nighthawk
Plug-In Carbon Monoxide Alarm with Battery Backup and Digital Display
#KN-COPP-3 |
|
|
Description
This Carbon Monoxide Alarm offers digital display allowing easy
viewing of carbon monoxide levels. Its 9V battery back up provides you
and your family protection even during power outages. The KN-COPP-3
features a hide-a-way cord that allows for multiple installation
possibilities. Digital Display, 9V battery back up, Hide-a-way cord,
Test/Reset Button, Loud 85dB Alarm, Low Battery Warning, Easy
Installation |
|
|
Click Picture for
Details or to Purchase these Items |
|
| |
|
Source
Amazon |
Kidde
Battery-Operated Carbon Monoxide Alarm with Digital Display #900-0146 |
|
|
Description
The leading cause of accidental poisoning deaths in North
America, Carbon Monoxide is odorless, tasteless and invisible. It is a
silent killer. Kidde CO alarms include the most accurate sensing
technology available, the patented Nighthawk electrochemical sensor.
This unit provides continuous monitoring of CO levels, even during power
outages when many CO incidents occur. The backlit digital display on
this model allows for easy viewing of carbon monoxide levels from 30-999
parts per million. It will also detect and store concentration CO levels
as low as 11 and up to 999 PPM with its peak level memory display. This
alarm includes a snap on cover that gives immediate access to the
batteries and a safety feature that makes it difficult to close the
cover without the batteries being installed. Install at least one CO
alarm on every floor and in sleeping areas. Make sure CO alarms are at
least 15 feet away from cooking or heating appliances to prevent false
alarms. Replace CO alarms every 5 to 7 years to benefit from the latest
technology upgrades. |
|
|
Click Picture for
Details or to Purchase these Items |
|
| |
|
